I’ve written about Ford’s hands free driver assistance feature called BlueCruise before. But I was intrigued by it to such a degree that I approached Ford for the opportunity to try it out for myself. Ford not only said yes to that, but they gave me this to drive for a weekend:

This is the Ford Mustang Mach-E electric vehicle. I’m going to do a full review of it in the coming days. But for right now, I’m going to focus on BlueCruise.
What BlueCruise is designed to do is to allow the car to “sort of” drive itself in certain situations. Specifically, you have to be in what Ford calls a “Blue Zone” which is usually a divided highway that Ford has mapped out and is known to the car via having it downloaded to the car. More zones are being added all the time, so if your highway isn’t on the list, it likely will be soon. Another requirement is that the lanes on said highway need to be clearly be seen by the car’s cameras. Finally, the car via cameras inside the car need to be able to see your eyes so that it can confirm that you are paying attention to the road. That’s where the “sort of” part comes in because the car is basically driving under your supervision.

If you look above the pony on the steering wheel, but below the screen behind the steering wheel, you’ll see a rectangle. That’s where the cameras are located.
Here’s what you do to activate BlueCruise. Assuming the preconditions for BlueCruise to be available are there, and the screen turns blue and lets you know that you’re in a “Blue Zone”, hitting the cruise control button should activate it. And the first time that I tried it, it did. Then it started to complain that I wasn’t paying attention to the road that had a few beeps accompanying that message, and about a minute later the system shut off and the car beeped a lot. My wife was in the car with me at the time and it freaked her out. And this didn’t help her anxiety about being in a car that had this feature. I pulled into a parking lot and readjusted my seating position which was a tip that Ford had given me the day before via a briefing that covered BlueCruise and the Mach-E. I normally have a very upright seating position because I have a dodgy back. But I changed my setup so that I was lower than normal, and I was reclined slightly. After doing that, BlueCruise worked without an issue because it could now see my eyes.
Here’s a video that my wife took of me using BlueCruise for the first time and being completely hands free:
By the way, my wife wanted my hands on the steering wheel because she was super nervous about me driving hands free. Which I get. But we tested this out on a 218 KM drive where 85% of it was on highway 401 or highway 427 and it worked flawlessly. There were a couple of times where the system had me take control without all the beeping that I mentioned earlier. The first was on the eastbound 401 just after Milton where for reasons that I can’t discern, it had me take control just before going under an overpass. Then it re-enabled BlueCruise about 30 seconds later. The second was when a transport truck was beside me and a car was two or three car lengths in front of me. Again, the system had me take control, and then when the car in front of me exited the highway, it took over again. I am guessing that BlueCruise thought that this was a dicey situation and that it might have been better if a human took control of the car. That was interesting because when we got close to Toronto we encountered some traffic and BlueCruise was able to deal with the stop and go traffic that we had to deal with for about 10 minutes. Finally, I should mention that BlueCruise can make lane changes all by itself. Simply hit the signal and the car will do its version of a shoulder check and move left or right for you.
The one thing that I did appreciate is that when I was using BlueCruise, I was actually less stressed. I am pointing this out because going into this, I was assuming that because I had my hands off the wheel and I was using the system, I was going to be on alert the entire time. But the opposite happened the more I learned to trust the system and understand how it worked. On a long drive like a road trip, I can see how this could be be serious quality of life improvement. My wife became more comfortable with me using the system as well. Though she’s stated to me that if we owned this car, she’d never use it as she wants to be in complete control of the car at all times. Which is fair and not surprising to me as she’s never used the cruise control feature of our daily driver as she doesn’t trust that either. But I am thinking that if she had some seat time with BlueCruise in what she perceived as a “low risk” situation, she’d change her mind. Another thing that might help her to change her mind is the fact that Consumer Reports has had BlueCruise as the top-ranked active driving assistance system twice in a row out of 17 systems tested. So if it’s good enough for Consumers Reports, it’s likely good enough for you, and her.
My only gripe about BlueCruise is the fact that I had to alter my driving position to get it to work. While doable, my back wasn’t really a fan of that position by the end of the weekend. But I’m likely an edge case in that regard. Having said that, it would be nice if Ford made the eye tracking system a bit more flexible so that I didn’t have to change my position.
Ford has given you options in terms of how you can get BlueCruise:
- Any new purchased or leased Ford vehicle will come with a 90 day trial of BlueCruise.
- There is a one-year plan which will either be included standard or as an option based on the vehicle line and trim.
- Starting on select 2025 model year vehicle lines, Ford customers can choose to upgrade to a one-time purchase at vehicle order and won’t need to activate BlueCruise again on their vehicle. And this activation will stay with the car, which adds value to the car.
- You can activate BlueCruise on a month to month basis. For example, you could activate it for a road trip and then have it turned off when you get home.
And here’s a list of Ford vehicles that BlueCruise is currently available on:
- Ford Explorer
- Ford Expedition
- Ford F-150
- F-150 Lightning
- Mustang Mach-E
My verdict is that if you’re looking at a Ford vehicle, you should try out BlueCruise. I think that once you try it and trust it, you’ll find it an indispensable aid when you’re in the car for long periods of time.




HP Wolf Security Study Reveals Platform Security Gaps That Threaten Organizations at Every Stage of the Device Lifecycle
Posted in Commentary with tags HP on December 12, 2024 by itnerdHP today released a new report highlighting the far-reaching cybersecurity implications of failing to secure devices at every stage of their lifecycle. The findings show that platform security – securing the hardware and firmware of PCs, laptops and printers – is often overlooked, weakening cybersecurity posture for years to come.
The report, based on a global study of 800+ IT and security decision-makers (ITSDMs) and 6000+ work-from-anywhere (WFA) employees, shows that platform security is a growing concern with 81% of ITSDMs agreeing that hardware and firmware security must become a priority to ensure attackers cannot exploit vulnerable devices. However, 68% report that investment in hardware and firmware security is often overlooked in the total cost of ownership (TCO) for devices. This is leading to costly security headaches, management overheads and inefficiencies further down the line.
Key findings from across the five stages of the device lifecycle include:
From factory to fingertips – oversights in the supplier selection process, and onboarding and configuration limitations, impact device security across the lifecycle
The findings highlight the growing need for IT and security to be part of the procurement process for new devices, to set the requirements and verify vendor security claims:
IT professionals are also concerned about the limitations of their ability to onboard and configure devices down to the hardware and firmware level seamlessly.
Challenges and frustrations around the ongoing management, monitoring and remediation of devices
71% of ITSDMs say the rise in work-from-anywhere models has made managing platform security more difficult, impacting worker productivity and creating risky behaviors:
Monitoring and remediating hardware and firmware threats to prevent threat actors accessing sensitive data and critical systems is vital. However, 79% of ITSDMs say their understanding of hardware and firmware security lags behind their knowledge of software security. Moreover, they lack mature tools that would give them the visibility and control they would want to manage hardware and firmware security across their fleets:
Second life and decommissioning – how data security concerns are leading to an e-waste epidemic
Platform security concerns are also impeding organizations’ ability to reuse, recycle or resell end of life devices:
Complicating matters further, many employees sit on old work devices. This not only prevents devices from being repurposed, but it also creates data security risks around orphaned devices that still may carry corporate data.
A new approach to the device lifecycle is needed to improve platform security
More than two thirds (69%) of organizations say their approach to managing device hardware and firmware security only addresses a small part of their lifecycle. This leaves devices exposed, and teams unable to monitor and control platform security from supplier selection to decommissioning.
To manage platform security across the entire lifecycle, HP Wolf Security’s recommendations include:
For further insights and recommendations download the full report ‘Securing the Device Lifecycle: From Factory to Fingertips, and Future Redeployment’ here: [LINK]
About the data
Leave a comment »